Description
Replacement Fuel Tap Petcock made of cast Aluminium for long life. This generator has been supplied with different fitting depending on the year it was made. Be sure to order the correct one for your tank.
Male fitting - screws into the tank (fuel tank thread inside tank) then seals the O-Ring by tightening the secondary nut. Click on option to see picture.
Female fitting - screws onto the tank (fuel tank thread protrudes from tank) using the large nut on the petcock to attach and seal the O-Ring. Click on option to see picture.
Generator Guru says:
This are a common item to need replacing due to the exposed location of the part. We often hear that something has knocked it, resulting in a leaky, or broken Fuel Tap Petcock.
If you have had a Male Petcock break off with the stem still in the tank, use a pair of needle nose pliers and insert into the stem. Open the pliers up, and unscrew. It should release without damaging the tank. Be careful not to damage the thread on the tank, or you will need to replace the whole tank.
*Compatible part
