Skip to main content
Carb Carburetor (Complete Assembly) 19498052

Carb Carburetor (Complete Assembly) 19498052

(No reviews yet) Write a Review
Ar1,195,579.51
Ar235,762.21
(You save Ar959,817.30 )
Adding to cart… The item has been added

Description

*Image is for illustration purposes only and may not be an exact representation of the product.*

Designed for your Generator, this Carb will provide a tight fit, stable performance and is designed to give the correct fuel/air mixture to run your generator economically. Built with an aluminium casing for a long life. This replacement grade "A" Carb comes as a complete assembly (where relevant to carb selected would include bowl, solenoid, all inner workings etc) The Carb is calibrated and ready to swap with your old carb. Just remove your old Carb and replace with the new one.

**We also strongly suggest you replace the Carb Gaskets when replacing the carb. If the previous gaskets are worn or split they will not make a seal, allowing excess air into the fuel mix, resulting in difficulty to start and run your engine. A broken gasket seal can cause hours of excess work.**

Generator Guru says:

Modern fuel has ethanol added. Ethanol is a cleaning agent used to "fill out" fuel and to reduce harmful emissions. The concentration of ethanol added to fuel can damage your carb if left for any length of time. Usually leaving a slimy residue in the bottom of the carb bowl, damaging seals and clogging the workings within the carb, preventing it from mixing the air and fuel correctly.

This is also a part that wears with use and usually is replaced after 3000-3500 hours. If you are replacing before this time, it could be because, either contaminated fuel has been used or the Generator was stored for a long period with fuel in the system and the ethanol has degraded the carb.

We also suggest you purchase a new Fuel Tank Strainer and inline Fuel Filter when replacing this product.

*Compatible Part