Skip to main content
136 x 76 x 133 mm AGM Battery

136 x 76 x 133 mm AGM Battery

(No reviews yet) Write a Review
AZN280,14
AZN183,16
(You save AZN96,98 )
Regions can be shipped to:
UK, Europe, CAN, AUS, NZ, Global (additional shipping charges may apply)
WARNING:
Please read the full description prior to purchase!
Terms of Sale:
This is a "Speciality Order Item" which we order in for you, and may take 1-3 extra days for delivery. Be sure you have correctly selected the size for your unit. All sales are final, due to the weight and shipping restrictions.
Adding to cart… The item has been added

Description

agm-battery-info-pic.png

Replacement AGM Battery that is powerful enough to start all small engines and portable generators and small engines with engines between 225 - 440 cc / 8 - 18 hp.

  • Voltage: 12 Volts
  • Technology: AGM (This battery is factory sealed & charged. The battery is ready for use immediately upon arrival.)
  • Terminals: Positive Front Left and Front Right both-post-battery.png (See video below for more details on fitting a battery.)
  • Connection type: "C" Screw Terminal (inc the following)
  • 2022-02-22-12-11-02.png
  • CCA (EN): 140 A (Strong enough to start all 225 - 440 cc / 8 - 18 hp small engines)
  • Capacity (C20): 11 Ah 
  • Length: 136 mm
  • Width: 76 mm
  • Height inc. terminals: 133 mm
  • Manufacturer Guarantee: 2 Years

We also highly suggest:

1) you inspect the battery cables for damage

2) test your battery charging rectifier, to be sure this is not the reason for the failed battery. The charging output should be a max of 13.8 volts DC. Anything over 13.8v DC indicates you need to replace the "Battery Charging Rectifier" too. If you do not you will damage the replacement Battery.

 Please find replacement Battery Charging Rectifiers and Battery Cables on the Make and Model listing for your Generator/Small Engine. These vary by manufacturer.

If the terminals are the wrong way around for your use, it is possible to fit batteries backwards in all portable generators and most small engines. To do this, remove the wiring from the engine body (-) and starter motor (+) when removing the original battery. Next, fit these wires to the new battery before placing the battery in the battery holder. Then proceed to wire back to the machinery as normal. See video below for more details on fitting a battery.)

If the Battery Tray is too small : It might be possible to bend the sides out, to make more room, and allow you to fit a larger battery.

 

If you need help, please contact us.

Videos