Description
Replacement Main Inverter Module.
Generator Guru says:
Before purchasing we suggest you make sure this is the part you require as a fault on the much less expensive "Ignition Coil Controller" can also lead you to believe the Inverter has blown. For testing techniques please see our webpage for the "Ignition Coil Controller" for your Model.
Next check that you are receiving no output on the sockets. Test by connecting a light or something of low cost on the AC Sockets while the generator is running. If you have no power output, you will require a new "Inverter." If there is power output, then replace the "Ignition Coil Controller."
To replace the "Inverter," you will need to undo the middle screw and remove the "Round Fuel On/Off Switch" from the front of the Generator before removing the Housing. Also undo the "Handle Fixing Seat" where the Recoil Rope comes from the Housing.
NOTE: When taking apart the Generator Housing to replace the Part, be sure to remove the Housing slowly and take note of all the small parts that make up the support of the Engine to the Housing, and how they fit back together. Assistance from another person would be advisable when removing the Housing and reassembling the unit.
*Compatible Part