Replacement Ignition Switch comes complete with 2 keys.
The simple plug and play connection make changing this part easy and quick. See instructions for changing the Ignition Switch below.
Generator Guru says:
To fit the new Ignition Switch, undo the control panel from the front and carefully pivot the control panel down, being sure not to pull any wires out. From the front of the panel grip the outer part of the Ignition Switch and undo the collar anticlockwise until the retainer comes off. Push the remaining part of the Ignition Switch through the panel and locate the wiring connector block. On the connector block push down the retaining tab and pull the connection apart.
Fit new Ignition switch by reversing the above process, but be sure no other wires behind the control panel have worked lose during the process, as this will affect the generator running correctly.
*compatible part
5 Reviews
5
Jesse Wofford
Posted by Jesse Wofford on 8th Apr 2021
Jesse Wofford
5
Great product & fast shipping
Posted by Sharyn Noakes on 30th Sep 2016
We were expecting very bad weather here, but found that the starter on our generator was bad. Contacted these people and found what we needed and were surprised how fast we received the new starter for our Generator. Although we were lucky and didn't need to use our generator due to any power failure Guru was our life savor getting this part to us as quickly as they did. Hats off to their staff...will buy again from them
5
Perfect Match
Posted by Brian on 12th May 2014
Ordered a hard to find new starter switch for my non-brand name generator. It was an exact match and works great. Thanks for stocking parts for this generator. Couldn't find the part in the States.
4
REPLACEMENT SWITCH
Posted by Unknown on 9th Dec 2013
The replacement switch is an exact match and was easy to install. It is good that such a part is still available.
