Description
Replacement 12V Charging "T" shaped Socket, Fuse and Leads
Generator Guru says:
These leads are used for charging external batteries and running external equipment which uses the clamp style connection. The charge rate will be 12V DC at 8 Amps.
If you are retro-fitting this charging port, be sure you have the necessary connection block under the fuel tank. Although most do have this connection block for the 12v fitted, there are some on the market which do not.
To check: Turn off the fuel and undo the 4 bolts holding the tank to the engine. Underneath you should see 2 wires going to a white/cream connector block. This is where the socket connects.
*compatible part