Cylinder Head 13231

Cylinder Head 13231

(1 review) Write a Review
£253.78 £61.98
(You save £191.80)

Description

** SUGGESTED FOR REPAIR CENTRES ONLY! SPECIALIST KNOWLEDGE AND EQUIPMENT NEEDED TO CORRECTLY SEAT AND INSTALL THE VALVES.  **

TO PURCHASE ONE OF OUR PRE-BUILT CYLINDER HEAD, PLEASE SEE OUR SEPARATE PRODUCT LISTING ON THE MODEL PAGE

 Replacement Cylinder Head cast from toughened aluminium.

Generator Guru says;

Please be aware this is only the Cylinder Head. It does not include any moving parts or valve seals. To purchase these parts please see the listings for Cylinder Head parts.

Please see our video below for resetting the Valve Clearances once you have installed the head.

Please see below for the recommended Torque values and Valve Clearances

  • Cylinder Head Bolts: 24Nm or 17.7Lbft

 You need to adjust your valve lash clearances to:

Intake: 0.015" (0.381mm)
Exhaust: 0.015-0.020" (0.4-0.5mm) (Try the smallest setting first. If still not running right, change clearance to 0.020".)

*Compatible Part

Videos

1 Review

  • 5
    Exact part

    Posted by Marty on 30th Aug 2017

    I was worried the head would be wrong via an internet purchase. I was wrong with Generator Parts Guru.
    Generator is running perfectly and with my engine rebuilding knowledge, a walk in the park!!!